• On sale!
  • -25%
BATIDOR ELÉCTRICO CON BOL "PROFESIONAL"
search
  • BATIDOR ELÉCTRICO CON BOL "PROFESIONAL"
  • BATIDOR ELÉCTRICO CON BOL "PROFESIONAL"
  • BATIDOR ELÉCTRICO CON BOL "PROFESIONAL"
  • BATIDOR ELÉCTRICO CON BOL "PROFESIONAL"
  • BATIDOR ELÉCTRICO CON BOL "PROFESIONAL"

"PROFESIONAL" ELECTRIC BLENDER WITH BOWL

864.50
648.38 Save 25%
Tax excluded

  TECHNICAL CHARACTERISTICS:

- 18/10 stainless steel Power: 300 W.

- Speed: 130-850 r.p.m.

- Capacity: 5.00 l.

- Bowl dimensions: Ø 22cm.

- Machine dimensions: 23 x 14.5 x 41 cm.

Quantity
In Stock

- Electric mixer with "PROFESSIONAL" bowl With this mixer you

  can beat, mix, knead products intended for the preparation of

  consumer foods such as doughs for bakery,

  pastries, pizzas, whip cream, beat eggs, etc.

- It allows a double rotation, rotary and orbital movement and

  incorporates a rotation speed selector from 130 to 850 r. p. m.

- Thanks to its 5-liter bowl and 300 watts of power, you can

  carry out all types of culinary activities without having to give

  your all in.

 

  TIPS FOR USE:

- Its operation is simple. The locking lever is raised to be able

  to raise the head of the mixer by about 45º. Place the bowl in

  its location, fixing it with a small clockwise turn.

- Next add the products you want to beat, mix or knead inside

  the bowl. (Take into account the increase in volume that will

  occur during its preparation).

- Select the type of rod or accessory to use and fix it at the

  end of the rotating shaft by making a small turn

  counterclockwise.

- Raise the locking lever to lower the head 45º. Plug the cable

  into a power outlet and before starting the motor, set the

  speed selector to its minimum value “0”.

- Press the ON/OFF switch to start up. At this time, a red light

  will turn on. Turn the speed selector knob gently clockwise

  until you reach the desired speed.

- Control the preparation time For very thick doughs, the

  maximum preparation time should not exceed 10 minutes.

  Otherwise the motor could overheat.

  After brewing, turn the speed selector to the minimum “0”

  position.

- Turn off the ON/OFF switch and you will hear a sound

  confirming that the machine has been turned off.

- Activate the locking lever to raise the head 45º. Next,

  remove the rod used, raise it and turn it counterclockwise,

  pull it down to remove it.

- Also remove the bowl or its contents, clean the remains of

  the bowl with a silicone or wooden spatula, avoiding

  scratching the interior surface.

69084

Data sheet

SKU
BATIDOR ELÉCTRICO CON BOL "PROFESIONAL", UTENSILIOS HO
Location
BATIDOR ELÉCTRICO CON BOL "PROFESIONAL", UTENSILIOS HOSTELERÍA, MAQUINARIA HOSTELERÍA,EQUIPAMIENTO HOSTELERIA
New

You might also like